 |
| Traffic Control Products That Truly Are Long-Lasting Solutions |
|
| - |
|
One question we are frequently asked by our customers is, "How long do your recycled rubber traffic control solutions really last?"
Although all of these solutions are covered under warranty (three (3) years on the product, one (1) year on the tape - under normal use), we believe our products can withstand the 'test of time' for many more years to come.
Established in 1995, GNR Technologies has been manufacturing recycled rubber traffic control solutions for over a decade and has hundreds of thousands of installed products worldwide. |
-
Parking lot in Montreal, Quebec with recycled rubber traffic control solutions available at
GNR Technologies
|
|
|
| - |
|
Some of our installed solutions have been known to last an upwards of 7+ years! The application and installation location plays a big factor in the products' lifespan; but with the proper installation and maintenance routine, these rubber parking solutions could last a lifetime. |
|
|
| - |
|
 |
Park-It Car Stops
Year Installed: 1998
Year Photo Was Taken: August 2008
Installation Location: Owensboro, KY (USA)
This is a photo of our Park-It Car Stops installed at a beauty salon in Owensboro, KY in 1998. Used to help guide vehicles when pulling into a parking stall, this installation was done on asphalt using rebar spikes and is 11 years old!
Thanks to G&H Rubber Supply Co. for the photo. |
|
|
-
-
|
Things You Can Do to Help Increase the Lifespan of Your Installation: |
|
-
|
|
While we cannot promise your GNR Technologies' solution will live on forever, extensive testing by the manufacturer has been done in order to ensure high product quality and performance. Furthermore, the amount of traffic volume (and thus product usage) can greatly determine how long your installation will last.
Even so, these tips below can help you get the most out of your solutions and can help increase the lifespan of your installation:
-
-
| 1. |
Use our products for their intended application; install them in the appropriate installation location
- The Easy Rider Speed Bump, Safety Rider Mini Hump, and Park-It Car Stop products are designed for use in parking facilities to help slow down traffic / guide drivers when parking
- The Alley Bump is designed for use in alleyways
- The Home Park-It is designed for use in residential garages / driveways
- All our products are intended for both indoor / outdoor use, and are to be installed on the floor surface (concrete or asphalt)
|
|
-
|
| 2. |
Use our provided installation hardware and follow our recommended installation instructions for the product:
We strongly recommend using the installation hardware provided on our website. The products have been tested using such hardware and we know it works.
Proper installation instructions can be found below. To view the installation instructions for each product, click on the Installation Guide tab which can be found below the product description on our website.
|
|
-
|
| 3. |
Install our products with the provided end caps (if applicable)
- Our product warranty is applicable only if end caps are installed with the product
- The end caps are designed to help protect the ends of the product from wear and tear
- They are also used to help ensure a smooth, safe ride for drivers
|
|
-
|
| 4. |
Remove the product in winter months
- We recommend removing our products during winter months to avoid damage by snow plow equipment
|
|
-
|
| 5. |
Schedule regular maintenance visits
- You should periodically inspect the spikes or lag bolts & shields and tighten them when necessary
|
-
-
We are dedicated to helping make your parking facilities safer. Our high-quality, high-performing products are tried, tested, and true. Take our advice; we know what works!
If you have any questions or concerns, please don't hesitate to contact our office by email or phone: 1 (800) 641-4143
|
|
|
| - |
| - |
| - |
| - |
|
 |
GNR Technologies
990 Upton
LaSalle, QC H8R 2T9 |
Phone: 1 (800) 641-4143
Email: info@gnrtech.com |
|
|
>
