Home Park-It - GNR Technologies

Features

The Home Park It^® provides guidance to help residents park with confidence in limited space. This unique home parking solution protects valuables and prevents damage in and around the garage or parking area. Constructed of recycled rubber and molded with GNR's highly reflective highway tape, the Home Park It^® is highly visible and extremely durable.

The Home Park It^® is 22 inches long and 4 inches high. It is covered by a 3 year warranty.

Home Park Its^® are:

Made of 100% recycled rubber
Long lasting and cost efficient
Ideal for indoor or outdoor residential parking
Will not chip, crack, or fade
Highly visible at night
Simple installation by one person
Resistant to ultraviolet light, moisture, oil, and extreme temperature variants
Temporary or permanent installation
1/10th the weight of a standard concrete curb
Maintenance free
3 year warranty

Available Online at:

www.SafestParkingProducts.com

Installation Locations:

Surface parking lots

Garages

Warehouses

Side or wall curbing

Dimensions

		Home Park-It® Dimensions: (L) 22" x (W) 6" X (H) 4" - 9 lb.

Technical Specs

Product Name:

Rubber Car Stop

Models:

22" in length

Product Description :

1. Material: compression molded composite of the 100% recycled rubber and polyurethane prepolymer
2. Physical properties of the rubber composite:
a) Density 0.6 oz/cu in (ASTM C642)
b) Durometer Hardness 65A ± 7 (ASTM D2240)
c) Tensile Strength* minimum 210 psi (ASTM D412)
(* main structural areas)
d) Compression deformation 10% at 70psi, 68°F (ASTM D575)
e) Brittleness at Low temperature: -40°F (ASTM D746)
f) Freeze and thaw when exposed to deicing chemicals (ASTM C672)
g) Coefficient of thermal expansion 8 x10-5 in/in/°F (ASTM C531)
h) Weathering 70 hours at 158°F (ASTM D573)
- hardness retained
100% (± 5%)
- compressive strength 100% (± 5%)
- tensile strength 100% (± 5%)
- elongation retained 100% (± 5%)
3. Available models: 22" length
4. Finishing: Black with in-molded reflective pavement marking tape in yellow.

Componets:

a) 100% recycled rubber from car and truck tires (NR, SBR)
b) polyurethane prepolymer for rubber granules
c) yellow durable and reflective in-molded pavement marking tape

Installation Guide

1. Simply place the Home Park-It^® centered straight in front of one wheel to insure your chosen position.

Warning: Your Home Park-It^® is only a guide, not a barrier. If you do not brake on contact, you may ride over it.

Some images of installation locations of the Home Park-It^®: